Soffits

PRO-TECH carries aluminum and vinyl soffiting and accessories ideally suited for almost every style of home.

Just right for overhangs, porch ceilings, and carports, PRO-TECH carries soffiting in a wide variety of colours and profiles and are available in ventilated and non-ventilated styles. Choose from a range of profiles from wide panel vented aluminum to the
Vinyl Designer Beaded panel simulating distinctive tongue in groove paneling.

KAYCAN ALUMINUM SOFFIT, both vented and solid,
comes in a variety of sizes, colours, and configurations:

2 Panel 16'' Vented or Non-Vented
192 sq. Ft	16 panels	12 Ft length

3 Panel 16" Vented or Non-Vented
192 sq. Ft	16 panels	12 Ft length

SP-600 16" Vented Panel
192 sq. Ft	16 panels	12 Ft length

SP-100 16" Plain Panel
192 sq. Ft	16 panels	12 Ft length

KAYCAN VINYL SOFFIT

Round Hole Vinyl - 16"
192 sq. Ft	16 panels	12 Ft length


GENTEK® ALUMINUM SOFFIT,Partnered with our smooth or ribbed fascia board, Gentek soffit provides essential ventilation to help prevent roof structure and rafter decay.

	Pieces per carton............18...........18 Squares/carton.................3...............3 Coverage/carton..........18m2.......194 sq ft Exposure/piece..........406mm........16 ft. Length/piece.............283cm2........12'-2 3/8" Vent area/linear ft...43.4cm2...........6.73sq."/ft Weight/carton...........23.3kg..............51.4lbs.
	Pieces per carton............18...........18 Squares/carton.................3...............3 Coverage/carton..........18m2.......194 sq ft Exposure/piece..........406mm........16 ft. Length/piece.............283cm2........12'-2 3/8" Vent area/linear ft...43.4cm2...........6.73sq."/ft Weight/carton...........23.3kg..............51.4lbs.
GENTEK®VINYL SOFFIT
	Pieces per carton............24..............24 Squares/carton..................2.................2 Coverage/carton..........18.58m2.......200 sq ft Length/piece.............3.05m...............10' Weight/carton...........41.1kg..............90lbs.
	Pieces per carton............16..............16 Squares/carton..................2.................2 Coverage/carton..........17.8m2.......192 sq ft Length/piece.............3.65m...............12' Weight/carton...........38.6kg..............85lbs.

THE FINISHING TOUCH . . .
At last for those special needs - or those who simply seek an outstanding indoor or outdoor panelling system that lives up to its promise of performance.

If you're looking for versatility Royal Crest Beaded Panel has the profile, the utility and the finish you're looking for.

FOR MORE DETAILS ABOUT ROYAL CREST DESIGNER BEADED PANELS

CLICK HERE

Ventilation Requirements

NEW CONSTRUCTION
The National Building Code states that every roof space or attic above an insulated ceiling shall be ventilated with openings to the exterior to provide unobstructed vent area of not less than 1/300th of the insulated ceiling area. Vents may be roof type, eaves type, gable end type, or any combination of these and shall be uniformly distributed on opposite sides of the building. vents shall be designed to prevent the entry of rain, snow and insects. Note that some regulatory authourities require at least 50% of the total vent area to be in the roof overhang. Check the requirements in your local area.

RENOVATIONS
Though the National Building code, the CCMC Residential Standards or other codes are not generally applicable to renovation, it is good practice to provide a total vent area which is a minimum 1/300th of an insulated ceiling area and to distribute it uniformly on opposite sides of the building. Further, it is recommended that, where possible, the existing soffit vent area and the existing soffit vent location be retained in the application of new soffit.

NOTE
Each 3.72m (12' 2") panel of soffit contains .066m2 ( 102.2 in2) free flow ventilation area. To determine the minimum number of panels you should have, assuming that the total ventilation requirement is provided by the soffit, use the following formula:

metric   = attic space (square metres) ÷ 20

                            or

imperial = attic space (square feet)    ÷ 200

"Victoria's One Stop Shop for All Your Exterior Building Needs" PROTECH Exterior Products 327 Harbour Rd., Victoria BC.
TEL - 250 382-5885 - Toll Free 1-866-776-5111	Email: info@protechvi.com	FAX - 250 382-5748